Nederlands
EnglishHT300L HPLC Autosampler
Product Information:
Works with any HPLC System!
The HPLC autosampler HT300L is an automatic sampler designed to operate with virtually any HPLC system.
The HPLC Autosampler incorporates an elegant swivel head that allows a manual injection and a special Rheodyne injection valve to give accurate full or partial loop fill injections.
Using an HPLC Syringe, the system mimics manual injections and eliminates the need for transfer lines - reducing the risk of sample carry-over.
The communication port of the sampler has a variety of input and output signals to ensure that it can interface with your system.
A large volume version for semi-prep HPLC applications or Flash Chromatography applications is also available.
HT300L Autosampler is available with a 10 position fixed tray
Price: € 8500.00
(Now in Februari/March Windows-software for free; value: €750.00)
or with a 110 position rotating tray for 2 or 2.5ml vials (Daisy Wheel)
Price: € 9000.00
(Now in Februari/March Windows-software for free; value: €750.00)
or the HPLC large volume autosampler with 40 position tray for 10ml vials.
Includes injection valve
Price: € 8750.00
(Now in Februari/March Windows-software for free; value: €750.00)
Easy to Use:
The instrument is controlled by a user-friendly integrated keypad, or by a PC using the HT-COMSoft Software.
The HT300L HPLC autosampler is equipped with an unprecedented number of
benefits. It is easy to use and yet allows the most sophisticated sampling
techniques:
- Syringe washes with sample or with solvent
- Pull up strokes for bubble elimination
- Controlled filling and injection speeds
- Internal standard techniques.
Bar code reading is also available as an option.
Key Features:
- Direct syringe injection minimises dead volume and allows partial loop fills
- Rotating head design leaves injection port free for manual injection
- May be configured for left or right operation
- Variable fill speed allows for wide range of sample viscosities
- Optional syringe volumes optimised for specific applications
- Comprehensive and easy control via keypad or PC
The HT300L has a Rheodyne valve with variable loop sizes depending on the application. The valve is automatically controlled and powered by the autosampler.
The tray of the autosampler may be configured in the right or left position, with either a 10-position fixed tray (HT300L-10) or with a 110-position movable tray (HT300L) for vials of 2 and 2.5 ml.
It uses syringes with volume from 10 to 100µl. There is also a special large volume version (HT300LV) designed for use with syringes up to 10ml - ideal for semi prep HPLC or small volume flash chromatography applications.
| Specifications | |
| Analytical Parameters | |
|
Analytical parameters are programmed using up to 10 methods. Any vial may be run using any method, programmed as a sequence. Each method includes: |
|
| Volume: | Steps of 0.1µl |
| Mode: | Every inject, sample and step |
| Washes: | Up to 15 |
| Volume: | Steps of 0.1µl |
| Washes: | Up to 15 |
| Volume: | Steps of 0.1µl |
| Mode: | On waste vial, on the loop |
| Washes: | Up to 15 |
| Sample Volume: | Steps of 0.1µl |
| Fill Speed: | 0.1 - 100µl/sec |
| Bubble Elimination: | Up to 15 pull up strokes |
| Viscosity Delay: | 0 - 15secs |
| Injection Speed: | 0.1 - 100µl |
|
Dwell Time (before and after inject): |
0 - 99secs |
| Int. STD Volume: | Steps of 0.1µl |
| DRV Volume: | Steps of 0.1µl |
| DRV Time: | 0.1 - 25mins |
| DRV Volume: | Up to 15 repetitions |
| Physical Characteristics | |
| Dimensions (W x H x D): |
600 x 520 x 400mm 470 x 520 x 400mm (Pocket) |
| Mass: |
13.0kg 8.0kg (Pocket) |